This bike will not only be raced by our Gravity Enduro team – it was actually designed in conjunction with them. Their input to the geometry, combined with the new carbon front triangle and oversize hardware, adds up to a very stiff and capable chassis.
This bike is ready for anything you want to throw at it, from hard-core trail riding to EWS Enduro racing. With its open front triangle design it is possible to fit various options of rear shock including coil shocks and still carry a full size water bottle.
The G-170C Works has extra width built into the rear chainstays allowing the rider to fully exploit future developments in wide high volume tyres up to 27.5 x 2.8″ and maintain mud clearance.
|COLOUR||Matt Petrol with Lime/Mist/Grey||CASSETTE||SRAM XG-1295 Eagle, 10-50, 12 Speed|
|FRAME||Carbon, Uni-directional Multi Monocoque Front Triangle with Internal Cable Routing, Tapered Head Tube, Intergrip Seat Clamp System, 2 hole ISCG Mount, Alloy Symmetrical SCR Rear Triangle and 148mm Boost Dropouts||CHAIN||SRAM Eagle, 12 Speed|
|FORK||RockShox Lyrik RC2 27.5″, 180mm Travel, 37mm Offset, DebonAir, Charger 2 Damper, Fast Black Coating, Tapered Steerer, 110mm x 15mm Boost, Maxle Ultimate||CRANKSET||SRAM Descendant Carbon Eagle, X-SYNC 2, Direct Mount 34T, DUB, 170mm, Boost, 12 Speed|
|REAR SHOCK||RockShox Super Deluxe, DebonAir, RCT, Fast Black Coating, Adjustable Rebound, 2 position low speed compression adjustment||BOTTOM BRACKET||SRAM DUB, BSA, 73mm|
|HEADSET||FSA No. 42 Orbit ZS Plus, Integrated, 1 1/2″ Lower and 1 1/8″ Upper Sealed Cartridge Bearings||SEATPOST||RockShox Reverb Stealth, 30.9mm, S 125mm Travel, M/L 150mm Travel, X1 Remote|
|REAR HUB||Hope Pro 4, Sealed Stainless Steel Cartridge Bearings, 12mm x 148mm Boost Through Axle, 28 Hole||SADDLE||Whyte Custom, Team, Lightweight Foam, CrMo Rails, Triple Panel Design|
|FRONT HUB||Hope Pro 4, Sealed Stainless Steel Cartridge Bearings, 15mm x 110mm Boost Through Axle, 28 Hole||HANDLEBAR||RaceFace NEXT R Carbon, 20mm Rise, 35mm Bar Bore, 800mm Wide|
|SPOKES||DT Swiss Competition Butted 2.0-1.8-2.0mm, Black Stainless, Brass Nipples||STEM||RaceFace Turbine, 35mm Bar Bore, 32mm Extension|
|RIMS||Whyte 30mm Carbon Hookless, Offset, Tubeless Ready, 3M Rim Strip with Tubeless Valves Included, 28 Hole||GRIPS||Whyte Lock-on V Grip|
|TYRE||Maxxis Minion DHF WT, TR, 27.5″ x 2.5″ 60TPI, EXO Sidewall Protection, 3C Maxx Terra, Dual Compound, Front, Maxxis Aggressor WT, TR, 27.5″ x 2.5″ 120TPI, Double Down Casing with Butyl Inserts, Dual Compound, Rear||BRAKES FRONT||SRAM Code RSC, 4 Pot with Sintered metal pads, 200mm Rotor|
|SHIFT LEVERS||SRAM X01 Eagle, MMX, 12 Speed||BRAKES REAR||SRAM Code RSC, 4 Pot with Sintered metal pads, 200mm Rotor, Internal Routing|
|FRONT MECH||N/A||BRAKE LEVERS||SRAM Code RSC, MMX|
|REAR MECH||SRAM X01 Eagle, 12 Speed||PEDALS||None|